费亮瑜 讲师

• 学院： 汽车学院
• 性别： 男
• 出生年月： 1994-09-20
• 职称： 讲师
• 学位： 博士
• 学历： 博士
• 毕业院校： 西安交通大学
• 联系电话： 17691182038
• 电子邮箱： fei.liangyu@chd.edu.cn
• 通讯地址：
• 邮编： 710064
• 传真：
• 办公地址： 陕西省西安市长安大学渭水校区汽车学院506
• 教育经历：

  2023.12 至 2024.12 大阪大学 博士联合培养

  2020.03 至 2024.12 西安交通大学 博士

  2018.09 至 2020.02 西安交通大学 硕博贯通

  2012.09 至 2016.06 华南理工大学 学士

  
  

第一作者已发表学术论文：

1. Fei L, Feng Z, Li H, et al. Effect of a Zn interlayer on the formation mechanism and mechanical performance of AA6061/DP590 steel resistance riveting welding. Journal of Materials Processing Technology, 2023, 322: 118213. (SCI，中科院一区 TOP，IF:7.5)

2. Fei L, Feng Z, Jiang F, et al. Process optimization of robust bonding between DP590 and AA6061 using resistance riveting welding. Journal of Manufacturing Processes, 2023, 104: 273-288. (SCI，中科院一区 TOP，IF:6.8)

3. Fei L, Jiang F, Zhang P, et al. Strategies of reducing the heat-affected zone in Mg/steel resistance riveting welding joints for improving joint quality. Journal of Manufacturing Processes, 2024, 124: 1316-1329. (SCI，中科院一区 TOP，IF:6.8)

4. Fei L, Li H, Feng Z, et al. Study on the joint formation mechanism and performance of resistance rivet welding of Mg/steel dissimilar materials. Journal of Materials Research and Technology, 2023. (SCI，中科院二区 TOP，IF:6.2)

5. Fei L, Zhao S, Zhang P, Feng Z, et al. Study on the microstructure and failure mechanisms for flat resistance element welding-bonding aluminium alloy/Q235 steel joints. Science and Technology of Welding and Joining, 2023, 28(1): 63-71. (SCI，中科院三区，IF:3.1)

6. Fei L, Zhao S, Zhang P, et al. Microstructure and mechanical performance of flat resistance element welded aluminum alloy/Q235 steel joints. The International Journal of Advanced Manufacturing Technology, 2022, 120(9): 6337-6349. (SCI，中科院三区，IF:2.9)

7. 费亮瑜，赵升吨, 冯智彦等. 铆接设备的研究现状及发展趋势. 第十七届全国塑性工程学会年会暨第九届全球华人塑性加工技术交流会学术会议 [C]. 中国机械工程学会塑性工程分会: 中国机械工程学会.（2022）

8. 费亮瑜，赵升吨, 蒋飞等. 侧凹式铆钉铆接工艺参数对铆接成形的影响研究. 第十七届全国塑性工程学会年会暨第九届全球华人塑性加工技术交流会学术会议 [C]. 中国机械工程学会塑性工程分会: 中国机械工程学会.（2022）

与他人合作发表学术论文：

1. Jiang F, Fei L, Jiang H, Zhang Y, Feng Z, et al. Constitutive model research on the hot deformation behavior of Ti6Al4V alloy under wide temperatures. Journal of Materials Research and Technology, 2023, 23: 1062-1074. (SCI，中科院二区 TOP，IF:6.2，第二作者)

2. Zhang Y, Fei L, Chui C K, et al. Machine Learning Surrogate Model Optimized by Improved Sparrow Search Algorithm for Multi-Objective Optimization of Permanent Magnet Synchronous Motor Direct-Drive Pump. IEEE Transactions on Vehicular Technology, 2024. (SCI，中科院二区 TOP，IF:6.1，第二作者)

3. Li H, Xu H, Fei L, et al. Multiple process microstructure evolution simulation of ultrasonic assisted rolling directed energy deposition. Materials & Design, 2023, 231: 112028. (SCI，中科院二区 TOP，IF:7.6，第三作者)

4. Feng Z, Zhao S, Fei L, et al. Research on deformation mechanism and load effects of three-roller bending process for large gear teeth profile. The International Journal of Advanced Manufacturing Technology, 2022, 120(7-8): 4951-4961. (SCI，中科院三区，IF:2.9，第三作者)

5. Zhang Y, Li J, Fei L, Feng Z, et al. Operational performance estimation of vehicle electric coolant pump based on the ISSA-BP neural network. Energy, 2023, 268: 126701. (SCI，中科院一区 TOP，IF:9，第三作者)

6. Feng Z, Zhang Q, Zhang Y, Fei L, et al. Practicability analysis of online deep reinforcement learning towards energy management strategy of 4WD-BEVs driven by dual-motor in-wheel motors. Energy, 2024, 290: 130123. (SCI，中科院一区 TOP，IF:9，第四作者)

7. Zhang P, Chao C, Zhao S, Fei L, et al. In-situ solid state repairing method for failure flat clinched joint of aluminum alloy. Transactions of Nonferrous Metals Society of China, 2023, 33(5): 1361-1372. (SCI，中科院一区，IF:4.7，第四作者)

8. Li K, Zhang D, Zhao S, Zhang P, Fei L, et al. A novel multipass incremental gear rolling process with blank and rolling die axes crossed. The International Journal of Advanced Manufacturing Technology, 2023, 129(1): 715-726. (SCI，中科院三区，IF:2.9，第五作者)

9. Feng Z, Zhao S, Gao W, Zhang Y, Fei L, et al. Study on a novel in-wheel motor driving system driven by two permanent magnet synchronous disc motors. IEEE Transactions on Vehicular Technology, 2023, 72(5): 5922-5933. (SCI，中科院二区 TOP，IF:6.1，第五作者)

10. Jiang F, Zhao S, Zhang S, Fei L, et al. Finite element analysis and experiment study on axial infeed hot rolling process of thread with Ti6Al4V. The International Journal of Advanced Manufacturing Technology, 2022, 121(9): 5873-5884. (SCI，中科院三区，IF:2.9，第六作者)

11. Zhang P, Zhao S, Zhang C, Fei L, et al. Microstructure and mechanical properties of probeless friction stir extrusion joined joints of 6061-T6 aluminum alloy to Q235 steel. The International Journal of Advanced Manufacturing Technology, 2022: 1-15. (SCI，中科院三区，IF:2.9，第六作者)

12. 张鹏, 张佳莹, 赵升吨, 费亮瑜, 等. 铝合金板材摩擦辅热平底铆压塑性连接工艺. 塑性工程学报, 2022, 29(05): 109-118. (中文核心，第七作者)

13. 张鹏, 赵升吨, 张传伟, 费亮瑜, 等. 螺纹铆钉式搅拌摩擦铆焊塑性连接机理及接头力学性能研究. 机械工程学报, 2022, 58(08): 126-135. (中文核心，第六作者)

14. 张鹏, 赵升吨, 张佳莹, 费亮瑜, 等. 摩擦铆压用交流伺服塑性连接设备结构可靠性研究. 锻压技术, 2022, 47(02): 145-151. DOI:10.13330/j.issn.1000-3940.2022.02.022. (中文核心，第四作者)

15. 蒋飞, 孟非然, 赵升吨, 费亮瑜, 等. 轴类件复杂型面高效精密滚轧工艺及设备研究现状分析. 精密成形工程, 2021, 13(04): 92-101. (中文核心，第五作者)