个人资料
个人简介曹伟,男,1992年生,本科读于四川大学化工学院,硕博就读于四川大学空天科学与工程学院,于2019年获得机械设计及理论博士学位,现为长安大学工程机械学院副教授,硕士生导师,国际硕士生导师。 主要从事机械传动系统动力学、摩擦学和可靠性、机器学习与人工智能应用的研究,作为科研骨干参与了国家重点研发计划、国家自然科学基金重点项目、军品配套重点项目、中国北车项目、埃克森美孚合作项目等。 主持国家自然科学基金青年项目、陕西省高校科协青年人才托举计划项目、中国博士后基金委面上项目以及陕西省自然科学基金青年项目,发表SCI/EI论文30余篇。获得中国机械工业科技进步奖三等奖、山东省机械工业科学技术奖一等奖各一项。 欢迎各位同学加入课题组,课题组氛围轻松,亦师亦友! 邮箱:cw334926@163.com QQ:591066063 社会职务1、Tribology International、Nonlinear Dynamics、Industrial Lubrication and Tribology等SCI期刊审稿人 2、NSFC国家自然科学基金委函评专家 研究领域1、传动系统动力学与摩擦学 3、涂层接触力学与热力学 4、机电传动系统控制 5、机器学习与人工智能应用 开授课程《机械设计》 科研项目主持项目: 1、国家自然科学基金委青年基金项目:复杂工况下弧齿锥齿轮摩擦动力学耦合机理与微点蚀预测方法,2021.1-2023.12 3、陕西省高校科协青年人才托举计划:热混合润滑状态下螺旋锥齿轮胶合强度预测方法,2022.1-2023.12 4、陕西省科技厅,自然科学基金青年项目:基于特征平面法的弧齿锥齿轮传动多轴疲劳寿命预测方法研究,2020.1-2021.12 5、长安大学,中央高校基本业务费资助项目(优秀博士毕业生项目):弧齿锥齿轮微点蚀预测方法研究,2020.1至2022.1 6、长安大学,中央高校基本业务费资助项目(高新技术培育项目):螺旋锥齿轮热-弹性耦合应力与点蚀机理,2023.1至2026.1 7、企业合作项目:齿轮接触力学程序开发,2021.8-2022.8 参与项目: 1、国家科学技术部,863计划:机器人高可靠精密谐波减速器系列产品开发及产业化 2、国家自然科学基重点项目:高性能弧齿锥齿轮和准双曲面齿轮应用基础研究 论文Liu C, Cao W, Song X, et al. Research on Semi-Analytical Method of Three-Dimensional Dual-Phase-Lagging Heat Conduction Model[J]. International Journal of Heat and Mass Transfer, 2023, Available at SSRN 4469554.(通信作者,SCI,Top期刊) Cao W, He, T, Pu, W. et al. Dynamics of lubricated spiral bevel gears under different contact paths. Friction, 2021. https://doi.org/10.1007/s40544-020-0477-x(SCI,中科院一区,Top期刊) Cao W, Wang J, Pu W, et al. A Fatigue Model for Spiral Bevel Gears Under Mixed Elastohydrodynamic Lubrication Conditions[J], Lubricant Science, 2021,102-124(SCI) Cao W, Wang J, Pu W, et al.Micro Stress Cycle and Contact Fatigue of Spiral Bevel Gears by Rolling-Sliding of Asperity Contact [J]. Friction, 2020, 40544:1-19. (SCI,中科院一区,Top期刊) Wang D , Wu Y , Wang J ,Cao W. Post-buckling path and free vibration of a symmetric laminated plate vertically coupled with fluid under in-plane load[J]. Composite Structures, 2021(3):114433. (通信作者,SCI, 中科院一区,Top期刊) Cao W, Pu W, Wang J, et al. Effect of contact path on the mixed lubrication performance, friction and contact fatigue in spiral bevel gears[J]. Tribology International, 2018, 123:359-371. (SCI,中科院一区,Top期刊) Cao W, Wang J, Pu W, et al. Tribo-dynamic model and fatigue life analysis of spiral bevel gears [J]. European Journal of Mechanics - A/Solids, 2019, 74, 124-138. (SCI,中科院二区) Cao W, Wang J, Pu W, et al. A study on the effect of acceleration on slip velocity and lubrication performance in cylindrical roller bearings[J]. ARCHIVE Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology 1994-1996 (vols 208-210), 2016, 230(10): 1231-1243. (SCI) Cao W, Wang J, Pu W, et al. The effect of round corner on lubrication of high speed cylindrical roller bearings considering skidding[J]. Industrial Lubrication & Tribology, 2017, 69(6):01-13. (SCI) Wang Z, Pu W, Pei X & Cao W. Nonlinear Dynamical Behaviors of Spiral Bevel Gears in Transient Mixed Lubrication[J]. Tribology International, 2021(1-2):107022. (SCI,中科院一区,Top期刊) Gan L, Xiao, Wang J, Pu W, & Cao W. A numerical method to investigate the temperature behavior of spiral bevel gears under mixed lubrication condition. Applied Thermal Engineering, 2019, 147, 866-875. (SCI,中科院一区,Top期刊) Wang Z, Pu W, Zhang Y & Cao W. Transient behaviors of friction, temperature and fatigue in different contact trajectories for spiral bevel gears[J]. Tribology International, 2019, 141: 105965. (SCI,中科院一区,Top期刊) Wang Z, Pu W, He T, Wang J & Cao W. Numerical simulation of transient mixed elastohydrodynamic lubrication for spiral bevel gears[J]. Tribology International, 2019, 139:66-67.(SCI,中科院一区,Top期刊) 曹伟,蒲伟,万一品,等. 任意卷吸速度矢量点接触摩擦简化计算方法. 浙江大学学报,2021,55(12):1-9.(EI) 杨羽,毛世民,王迪, 曹伟等. 弧齿锥齿轮全工序法及机床误差敏感性分析[J]. 浙江大学学报(工学版),2022,56(5):879-889. (EI,通信作者) 曹伟, 蒲伟,王家序,等. 弧齿锥齿轮摩擦系数与啮合效率研究. 摩擦学学报,2018, 38(3): 247-255. (EI) 曹伟, 王家序, 蒲伟,等. 加速工况下圆柱滚子轴承运动特性研究[J]. 中南大学学报(自然科学版)2018, 49(3): 583-591. (EI) 曹伟, 王家序, 蒲伟,等. 润滑剂的黏弹性与动压力对圆柱滚子轴承打滑的影响[J]. 中南大学学报(自然科学版), 2018, 49(2):345-352. (EI) 曹伟, 王家序, 蒲伟, 等. 材料填充对滤波减速器啮合力与润滑特性的影响[J]. 工程科学与技术, 2016, 48(5):192-200. (EI) 索雪峰,何登辉,王华栋, 曹伟. 功能梯度材料环形热源三维瞬态温度场计算方法[J/OL].计算物理:1-16[2023-09-20].http://kns.cnki.net/kcms/detail/11.2011.O4.20230717.1955.004.html(通信作者) 科技成果荣誉奖励1、中国机械工业科技进步奖,三等奖 2、山东省机械工业科学技术奖,一等奖 3、入选“陕西省科协青年人才托举计划” 4、入选长安大学“长安学者” 人才支持计划,青年学术骨干一类 5、长安大学遴选海内外优秀博士毕业生 工作经历2019.7-至今 长安大学任教 |