Zhangzeyu

• Department: School of Construction Machinery
• Gender: male
• BirthDate: 1990-03-01
• Career:
• Degree: Ph.D
• Academic Credentials: Ph.D
• Graduate School: CHANG AN University
• Tel: (+86)-029-82334489
• Email: zhangzeyu@chd.edu.cn
• Address School: CHANG AN UNIVERSITY Middle-section of Nan er Huan Road Xi an, ShaanXi Province, 710064, China
• PostCode School: 710064
• Fax School: (+86)-029-82334489
• Office Location:
• Education experience:

Zhang Zeyu, Ph.D, senior engineer, Ph.D/master supervisor. He works in School of Construction Mechinery, Chang'an University, and he is academic visitor in the James Watt School of Engineering， University  of Glasgow.

· Mechanical and hydraulic transmission system

· Intelligent control of construction machinery

· Mechanical vibration and data mining

[1] Traction performance test of construction machinery (undergraduate s2504090)

[2] Engine and transmission performance test (undergraduate s2504030)

[3] Testing practice of road construction machinery (graduate s2504130001)

[1] Study on multi-mechanism cooperative operation principle and quality control of pavement construction and maintenance equipment in alpine environment，Natural Science Foundation of Tibet Autonomous Region(XZ202101ZR0044G),2021.01-2022.12, ¥70k, host.

[2] Efficiency optimal control of multi mechanism cooperative operation of multi-medium material pavement construction equipment in alpine area，International Postdoctoral Exchange Fellowship Program(2020056), 2020.06-2022.12, ¥300k, host.

[3]Research on damage mechanism and state identification of hydraulic torque converter in alpine region, China Postdoctoral Science Foundation (2019M663913XB), 2019.10-2021.09, ¥80k, host.

[4] Research on sparse characterization and fault diagnosis of rolling bearing damage in mine electromechanical equipment, Shaanxi Key Laboratory of Mine Electromechanical Equipment Intelligent Monitoring (SKL-MEEIM201907), 2020.01-2021.12, ¥30k, host.

[5] Research on multi-field coupling and intelligent power matching of high-power hydraulic torque converter for construction machinery, Fundamental Research Funds for the Central Universities, CHD (300102250106), 2020.01-2021.12, ¥50k, host.

[6] Research on energy saving theory and integration control method of hybrid power transmission system for construction machinery, Cultivation Project of Excellent Doctoral Dissertation of Central University (310825175010), 2017.01-2018.06, ¥20k, host.

[7] Research on construction process and equipment of semi flexible pavement in alpine region, Key Project of Tibet Tianlu Innovation and Development Foundation (XZ2019TL-G-02), 2019.08-2022.08, ¥1.5m, participant.

[8] Research on comprehensive efficiency optimization and key technology of transmission system for construction machinery, Natural Science Basic Research Plan in Shaanxi Province of China (2019JZ-10), 2019.01-2012.12, ¥100k, participant.

[9] Research and application of key technologies for energy conservation and emission reduction in construction machinery, National Key Technology Research and Development Program of the Ministry of Science and Technology of China (2015BAF07B08), 2015.04-2017.12, ¥300k, participant.

[10] Research on energy optimization theory and key technology of hybrid construction machinery based on hydraulic torque converter, Shaanxi Basic Research plan of Natural Science (2015JM5216), 2015.01-2016.12, ¥50k, participant.

[11] Research on the matching method of traction performance parameters for electric drive crawler bulldozer, Key Scientific Research Platform Improvement Project of Central University (300102259504), 2019.01-2019.12, ¥300k, participant.

[12] Key technology research of high-power lock-up hydraulic torque converter, Fundamental Research Funds for the Central Universities, CHD (310825153403), 2015.01-2017.12, ¥300k, participant.

[1] Zhang Zeyu, Shi Ze, Hui Jizhuang, et al. Research on Sparse Reconstruction of Engineering Equipment Bearing Signal under Strong Noise[J]. Mechanical Science and Technology for Aerospace Engineering, 2021,40(09):1361-1369.

[2] Zhang Zeyu, Ren Yu, Hui Jizhuang, et al. Feature Extraction of Loaders Multi-source Data Based on Principal Component Analysis Theory[J]. Modern Manufacturing Engineering,2021(09):40-46.

[3] Ren Yu, Hui Jizhuang, Shi Ze, Zhang Zeyu, Zhang Xuhui, et al. Feature Extraction of Loader Operation Based on Kernel Principal Component Analysis[C]. 2021 IEEE 6th International Conference on Intelligent Computing and Signal Processing, ICSP 2021, Xi'an, China: Institute of Electrical and Electronics Engineers Inc., 2021: 1442-1445.

[4] Geng Qi, Lu Zhiyong, Zhang Zeyu, et al. Numerical Simulation on the Rock Fragmentation Process Induced by Tunnel Boring Machine Disc Cutters Assisted by Pre-cut Grooves[J]. Journal of Xi’an Jiaotong University, 2021, 55(09):9-19.

[5]Zhang Zeyu, Hui Jizhuang, Shi Ze, et al. Cycle Condition Identification of Loader Based on Optimized KNN Algorithm[J]. IEEE Access, 2020, (08):69532-69542.

[6] Zhang Zeyu, Hui Jizhuang, Shi Ze, et al. Modal analysis of the torque converter in different prestress [J]. High Technology Letters.2020,26(01):61-67.

[7] Zhang Zeyu, Hui Jizhuang, Shi Ze. Research on Denoising and Filtering Method of Wavelet Packet Optimal Base Decomposition Tree[J]. Mechanical Science and Technology for Aerospace Engineering, 2020, 39(02): 28-34.

[8] Zhang Zeyu, Hui Jizhuang, Gao Shihao, et al. Research on threshold denoising method of mining machinery[C].IEEE ITNEC, 2020 IEEE 4th Information Technology, Networking, Electronic and Automation Control Conference (ITNEC 2020)，2020:1236-1240.

[9] Geng Qi, Xie Liyang Zhang Zeyu, et al. Influence of Tunnel Boring Machine Scraper Bucket Structure on the Mucking Performance [J]. Journal of Xi’an Jiaotong University,[9]2020, 54(11): 149-157.

[10] Zhang Zeyu, Hui Jizhuang,Suo Xuefeng,et al. Fluid-solid Interaction Analysis of Torque Converters[J]. Hitechnology Letters, 2019 25(03): 239-244.

[11] Zhang Zeyu, Hui Jizhuang, Bu Zhengfeng, et al. Power Matching and Speed Sensing Control between Hydraulic Torque Converter and Engine[J].Mechanical Science and Technology for Aerospace Engineering, 2018, 37(01): 55-62.

[12] Zhang Zeyu, Hui Jizhuang, Suo Xuefeng, et al. Strength Analysis of Hydraulic Torque Converter under Centrifugal Load[J]. Journal of Gansu Agricultural University, 2018(01): 162-167.

[13] Zhang Zeyu, Bu Zhengfeng, Hui Jizhuang, et al. Study on thermal characteristics of the assembly of high power torque converter in traction condition[J]. Journal of Chang'an University(Natural Science Edition), 2018, 38 (03): 116-126.

[14] Suo Xuefeng, Jiao Shengjie, Zhang Zeyu, et al. The performance calculation and experimental research of hydraulic torque converter based on ANSYS-CFX[J]. Journal of Machine Design, 2018, 35(10): 8-14.

[15] Wu Linlin, Hui Jizhuang, Zhang Zeyu, et al. Influence of Blade Number on the Original Features of Torque Converter for the Engineering Machinery[J]. Road Machinery& Construction Mechanization, 2018, 35(03): 109-114.

[16] Lei Jingyuan, Hui Jizhuang, Zhang Zeyu, et al. Study on the Effect of Blade Angle on the Performance of Hydraulic Torque Converter[J]. Road Machinery&Construction Mechanization, 2018, 35(02): 89-96.

[17] Zhang Z, Hui J, Suo X, et al. Control and Simulation of Speed Sensing for an EFI Engine[C]. IEEE Beijing Section, Global Union Academy of Science and Technology, Chongqing Global Union Academy of Science and Technology, Chongqing Geeks Education Technology Co., Ltd.Proceedings of 2017 IEEE 3rd Information Technology and Mechatronics Engineering Conference(ITOEC 2017),2017:461-465.

[18] Zhang Zeyu, Hui Jizhuang, Zheng Hengyu, et al. Research of the Comprehensive Power Matching for Rotary Head’s Hydraulic System of Rotary Drilling Rig [J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(12): 1834-1841.

[19] Hui Jizhuang, Zhang Zeyu, Song Ting. Design and Finite Element Analysis of General Connector for Multifunctional Rescue Vehicle[J]. Mechanical Science and Technology for Aerospace Engineering, 2014, 33 (02): 267-270.

[20] Hui Jizhuang, Guo Yunxin, Zheng Hengyu, Zhang Zeyu, Hu Hao. Locking control of hydraulic torque converter[J]. Journal of Traffic and Transportation Engineering, 2016,16(05): 66-73.

[21] Hui Jizhuang, Yang Yongkui, Zheng Hengyu, Zhang Zeyu, Han Wenpeng. Braking energy recovery system and control optimization of excavator based on accumulator[J].China Journal of Highway and Transport,2016,29(07):143-151.

[1] Zhang Zeyu, Hui Jizhuang, Wu Linlin, Lei Jingyuan, Gu Lichen. Construction and recognition method of a loader working condition model[P]. CN201811043486.1, 2021-06-22

[2] Zhang Zeyu, Hui Jizhuang, Wu Linlin, Lei Jingyuan, Shi Ze. A power matching method between engine and torque converter for loader[P]. CN 201910248220.9, 2020-06-10.

[3] Zhang Zeyu, Hui Jizhuang, Lei Jingyuan et al. A control method for the efficiency optimization of loader drive system [P]. CN 201811045095.3, 2018-09-07.

[4] Hui Jizhuang, Zhang Zeyu, Lei Jingyuan et al. Oil filling hydraulic system of hydraulic torque converter for loaders [P]. CN201610473412.6, 2016-09-28.

[5] Hui Jizhuang, Han Wenpeng, Zhang Zeyu, et al. Anti-reverse control method of excavator slewing mechanism[P]. CN 201510404990.X, 2017-11-14.

[6] Hui Jizhuang, Zhang Zeyu, Hu Hao, et al. A kind of sleeve pile machine and the construction method[P]. CN201410181950.9, 2015-11-30.

[7] Hui Jizhuang, Ren Yu, Zhang Zeyu, et al. Powder weighing and metering device[P]. CN202022727846.9, 2021-08-31

[8] Zhang Zeyu, Hui Jizhuang, Ren Yu, et al. Aggregate weighing, metering and conveying device[P]. CN202022725996.6, 2021-08-27.

[9] Zhang Zeyu, Hui Jizhuang, Geng Qi, et al. Fiber and water integrated weighing and conveying device[P]. CN202022727822.3, 2021-08-13

[10] Hui Jizhuang, Gao Shihang, Shi Ze, Zhang Zeyu, Xu Zijian. A gearbox structure for grader[P]. CN 201921105179., 2020-06-12.

[11] Hui Jizhuang, Zhang Zeyu, Zheng Hengyu, et al. Hydraulic circulating system of locked hydraulic torque converter [P]. CN201620641559.7, 2016-11-16.

[12] Hui Jizhuang, Zhang Zeyu, Hu Hao,et al. Locking and unlocking system of locking type hydraulic torque converter of bulldozer [P]. CN201520512881., 2015-11-18.

[13] Zhang Zeyu, Hui Jizhuang, Gao Shihao. Statistical software of operating point distribution for loader V1.0[P]. 2020SR0310188, 2020-04-07

[14] Zhang Zeyu, Hui Jizhuang, Gao Shihao. 11-stage Working condition division software of V-type operating cycle for loader V1.0[P]. 2020SR0310192, 2020-04-07

[15] Zhang Zeyu, Hui Jizhuang, Gao Shihao. 6-stage Working condition division software of V-type operating cycle for loader V1.0[P].2020SR0204340, 2020-03-03.

[16] Zhang Zeyu, Hui Jizhuang, Gao Shihao. A power matching software for analyzing the primary and secondary working conditions of the engine and the hydraulic torque converter V1.0[P].2020SR0148319, 2020-02-19.